Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Park Tool Deluxe Double Arm Repair Stand w/Two 100-3D Clamps
$639.95
The standard of the bike industry for over 40 years, the PRS-2.2-2 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Built from heavy-gauge oversized steel tubing, then chrome plated for years of carefree use. NOTE: The PRS-2.2 does not include base. Order #135 Steel Plate Base or FP-2 Floor Mounting Plate. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Easily height adjustable to five positions from 50" to 62" (128cm to 158cm) using our proven lock block system with locking pin - The maximum weight holding capacity of the PRS-2.2 is 120 lbs. (54kg) - Includes #105 cast aluminum work tray
Tri-Flow Superior Lube
$5.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Park Tool Ratcheting Click-Type Torque Wrench
$115.99
With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.
Evo TK-22 Tool Kit
$79.99
Repair essentials for the home mechanic. Kit includes: - BBe-1 External Bottom Bracket - CCI-1 Crank Cap Bolt Install/Removal Tool - CW-1 Chain Whip - PDL-1 Pedal Wrench - TRL-3 Tire Levers (x3) - CAT-2 Crank Arm Remover Tool - CNT-3 Chain Tool - ST-1 Spoke Wrench - CLT-2 Cassette Lockring Tool - TA-1 8mm Hex / 1/2-inch Ratchet Adapter - HW-8 8mm Hex Wrench - TW-1 T25 Torx Wrench - HWS-2 Hex Wrench Set (2, 2.5, 3, 4, 5, 6mm) - PK-1 Inner Tube Patch Kit
Magura Pro Bleeder Tool Kit
$77.66
- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid
Blackburn Pro Plugger CO2 Inflator Kit
$59.99
Greatness Complete Take greatness, add more = more greatness. The simply stellar Pro Plugger gains a few extra ingredients for surefire success, the it-makes-sense CO2’FER head combining an inflator and valve tool along with a 25g threaded CO2 and universal frame-mounting kit, mean everything’s always within reach, even on bikes with long reach. No need to scurry about rounding up odds and ends trying to beat dwindling daylight—simply grab bike, go and you’re already equipped with the Pro Plugger Combo’s on-bike tubeless repair system. - Pro plugger rubber mount, strap, core CO2 inflator and 25g threaded CO2 included
Blackburn Local Co2 Ride Kit
$49.99
Going for a ride but don’t know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else. - Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want - Wayside CO2 inflator with 16g cartridge - GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride - 2x tire levers
Fabric Chamber Multi-Tool
$49.99
The Chamber multi-tool offers 13 functions from an efficient T-bar head. A smooth finish caddy protects the tools and ensures the tool doesn’t snag jersey pockets or equipment. The T-Bar system increases functionality and ensures that hard to reach areas of the bike are easily accessed. A reversible ratchet model offers further functionality, providing a simple and elegant improvement upon a cyclist’s essential. Sleek,snag free, lightweight design -The smooth metal case of the Chamber safely and securely holds 13 tools, ensuring there is no snagging on clothing or equipment. Weighing in at only 162 grams it is lightweight and portable. Easily reaches inaccessible places -Seated securely within the Chamber are 6 double-ended bits and an 8mm over-bit. The bits can be used at different lengths in the Chamber head, increasing access to the many hard to reach areas on a bicycle. T Fixed or ratchet options -2 versions of the Chamber are available; Fixed head, which enables use of the tool at different lengths and Ratchet head, which offers the additional functionality of a reversible ratchet. Includes: 2mm/2.5mm/3mm/4mm/5mm/6mm/8mm Allen keys, SL3 and SL5 flat-blade screwdrivers, #1 and #2 Phillips screwdrivers, Torx T10 and T25 -Head: Ratchet or Fixed stainless steel -Base: Stainless steel -Body: Aluminium -Tools: 70mm steel
Blackburn Switch Wrap
$44.99
Imagine if you could bring a tool box with all the essentials you’d need for bicycle maintenance with you on every ride. Well then, stop dreaming: the Blackburn Switch Wrap is already here. Spec’d with their Big Switch multi tool, the Switch Wrap provides you quick access to everything you’ll need to fix just about anything that could go wrong on a ride. The Wrap features specific sleeves for an inner tube, up to a 20g CO2 cartridge, and a tire lever. And, it keeps the Big Switch tools at your fingertips. When opened, the tool kit hangs from your saddle so you can grab what you need without spreading it all on the ground, so lost tools will only exist in nightmares. Minimal. Compact. Secure. Convenient. The Switch Wrap. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and a flathead. - Nylon carrying pouch features sleeves for 20g CO2 cartridge, tire lever and includes a stash for your I.D., credit card and cash. - Attaches to seat rails or to bicycle frame. - 186g
RockShox Suspension Oil
$5.00 - $41.99
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
Muc-Off Nano Tech Biodegradable Cleaner
$14.99 - $39.99
- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean
Pedro's Fixed Torque Driver
$38.00
Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits
Park Tool Professional Cable And Housing Cutter
$37.99
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
Park Tool Adjustable Wrench
$35.95
Big and powerful, Park's Adjustable Wrench is forged from steel and chrome plated for maximum durability. Its jaws open up to 36mm and the torque-friendly, 12-inch handle is vinyl dipped for comfort.
Blackburn Wayside Multi Tool
$34.99
Remember that time on the trail when your brake lever reach went out of whack? Unfortunately, your multi tool couldn't get out of it's own way to turn the adjustment screw. Blackburn's Wayside Multi Tool changes all of that. - Individual Hex Keys - The most common hex keys snap on and off the tool and can be used individually to be able easily reach and properly torque any bolt head. All keys feature a ball end. - Optimized Tools - The selection, length and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 19 functions - 200 grams / 0.44 lbs
Muc-Off X3 Chain Cleaning Kit
$34.99
- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain
Pedro's L Hex Wrench Set
$34.99
The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder
Finish Line Fiber Grip Assembly Gel (1.75-Ounce Tube)
$9.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Finish Line Dry Lubricant with Teflon
$5.99 - $32.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant
Crank Brothers m19
$18.50 - $30.59
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Blackburn Tradesman Multi-Tool
$30.00
Why has no one invented a multitool that removes a chain quick link? Oh wait, Blackburn has. The Tradesman Multi-Tool has all the hex and Torx keys you're ever going to need in a portable tool, with the addition of a disc pad spreader and a tool that'll remove the most stubborn split chain links. - 18 functions - Quick link storage - Tools include: T25, T30, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm allens, disc brake pad spreader, flathead screwdriver and quick link chain tool compatible with 12 speed and fewer gears - 0.30lbs
Park Tool Bottom Bracket Tool
$30.00
Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more
Bontrager Elite Multi-Tool
$29.99
Refined functionality The Bontrager Elite Multi-Tool combines smooth style with practical design. This elegant tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - CNC-machined keys for lightweight durability - 2,2.5,3,4,5,6, and 8 hex along with Phillips, flat and T25 - Slim profile makes it easy to pack on any ride - Ultra-light aluminum alloy design
Muc-Off Disc Brake Cover
$29.99
- Protects rotor and calipers from overspray and while in transit - Quick and easy to use, fits all MTB and road rotors - Simply rinse and use again - Breathable neoprene
Park Tool Chain Checker
$29.49
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Park Tool SR-12.2 Sprocket Remover / Chain Whip
$28.95
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool
$26.99
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.
Park Tool Side Cutter Pliers
$25.95
Park's Side Cutter Pliers are professional quality, 7-inches long, and made from heat-treated, forged chromoly steel for crisp, easy cuts and durability. They boast soft-touch, dual-density handles for an excellent grip, too.
Lezyne Hex Kit
$24.99
The nine-piece Hex Kit is a professional quality set of hex wrenches ideal for shop use or the home mechanic. Each bit is formed from high-strength, extremely hard chrome-vanadium steel and treated with a super-durable chrome finish. The holder folds open for easier access to the tools and it has built-in holes for hanging. The set includes a 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10mm L-shaped bit with a spherical tip, and each are precision made for the best possible tolerance.
Muc-Off Drivetrain Cleaner
$19.99 - $24.99
- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals
Page 1 of 3 Next page